Salda AMBERAIR COMPACT CXP, Монтаж и инструкция по установке

Страница: 2 / 36

2 | EN AMBERAIR COMPACT CXP v2024.2
1. CONTENT
1. CONTENT 2
2. SYMBOLS AND MARKING 3
3. SAFETY INSTRUCTIONS AND PRECAUTIONS 4
4. INFORMATION ABOUT THE PRODUCT 5
4.1. DESCRIPTION 5
4.2. DIMENSIONS AND WEIGHT 5
4.3. TECHNICAL DATA 9
4.4. OPERATING CONDITIONS 10
4.5. STANDARD PACKAGE OF COMPONENTS 10
4.6. DESCRIPTION OF COMPONENTS 10
5. INSTALLATION 11
5.1. RECEPTION OF GOODS 11
5.2. TRANSPORTATION AND STORAGE 11
5.3. UNPACKING 12
5.4. PIPING AND INSTRUMENTATION DIAGRAM 13
5.5. MOUNTING 14
5.6. UNIT PLACING AND MOUNTING POSITIONING REQUIREMENTS 15
5.7. CEILING-MOUNTING OF THE UNIT 15
5.7.1. THE INSTALLATION OF THE SUPPORTING LEGS FOR THE FLOOR-MOUNTED VERSION 16
5.7.2. DRAINAGE 16
5.8. CONNECTION OF THE AIR DUCT 17
5.9. CONNECTION OF THE UNIT TO THE ELECTRIC NETWORK 17
5.10. START-UP RECOMMENDATIONS 18
5.10.1. SYSTEM PROTECTION 18
5.10.2. PRE START-UP RECOMMENDATIONS OF THE UNIT (IN THE PRESENCE OF THE END-USER) 18
6. MAINTENANCE 19
6.1. SAFETY INSTRUCTION 19
6.2. GENERAL RECOMMENDATIONS FOR THE MAINTENANCE OF VENTILATION SYSTEM 19
6.3. COVER OPENING 19
6.4. FILTERS MAINTENANCE 21
6.5. FANS MAINTENANCE 21
6.6. HEAT EXCHANGER MAINTENANCE 22
6.7. ELECTRIC, WATER HEATER MAINTENANCE 23
6.8. CONTROL BOARD MAINTENANCE 24
7. CONTROL 25
7.1. DEVICE CONTROL 25
7.2. DEVICE FUNCTIONS 25
8. CONNECTION OF ACCESSORIES 26
8.1. FIRE AND FIREPLACE PROTECTION 26
8.2. EXTERNAL CO
2
/RH SENSORS 26
8.3. ROOM CO
2
TRANSMITTER INSTALLATION RECOMMENDATION 26
8.4. CO
2
CONCENTRATION ACCORDING TO PETTENKOFER LIMIT 26
8.5. CONNECTION OF SUPPLY AND EXHAUST AIR DAMPERS 27
8.6. CONNECTION OF REMOTE CONTROL PANEL OR MODBUS 27
8.7. WATER HEATER CIRCULATION PUMP AND VALVE ACTUATOR 27
8.8. PREHEATER AND COOLER 28
8.9. ELECTRICAL DIAGRAMS AND ABBREVIATION IN ELECTRICAL CIRCUIT DIAGRAMS 28
9. POSSIBLE FAULTS AND TROUBLESHOOTING 33
10. ECODESIGN DATA TABLE 33
11. DECLARATION OF CONFORMITY 34
12. WARRANTY 35
12.1. LIMITED WARRANTY COUPON 35