If desired, adjust the screen center height by removing the three 1/4-20 x 2” Button Head Socket Cap Screws
and loosening (Do Not Remove) the three 1/4-20 x 5/8” Button Head Socket Cap Screws and the 1/4-20 x 3/4”
Set Screws.
Lower the Display Header to the desired position and reattach the 2” screws through the Display Header and
Vertical Post to the Flat Nut.
2a. Adjust Screen Center Height
See “A”
in Table
1/4-20 x 5/8” BUTTON HEAD SCREW - Snug after tilt adjustment complete
1/4-20 x 3/4” SET SCREW - Used for tilt adjustment
1/4-20 x 2” BUTTON HEAD
SOCKET CAP SCREW (3X)
Display Header
Vertical Post (3X)
Header Tilt
Adjustment
To adjust tilt angle, if necessary, leave the 1/4-20 x 5/8” Button Head
Screws loose and adjust the Set Screws. Snug the 1/4-20 x 5/8” Button
Head Screws, but do not over tighten.
2b. Adjust Tilt Angle
Salamander Designs, Single X-Large Display for 4 Bay Cabinets
501-726 [2.22]
