1
B
B
A
A
B
.
Connect Post
Screw foot with metal washer through
bottom shelf and onto the end of an
extruded post. Hand tighten fully then
use wrench on hex nut to tighten
nut onto underside of shelf.
90
O
A
.
Square Post
Square the post to the bottom shelf.
A
.
Insert shelf pegs down each post as shown.
2
!
!
!
!
Foot
Hex Nut
Washer
Doc No. 500-935 v8.21 QUAD - 3 of 4
Connect Posts to Bottom Shelf
WARNING:
Tighten by screwing the leveler foot NOT the post.
Add Shelves
WARNING:
If you are installing an optional door or drawer refer
to specific instructions before proceeding.
B
.
Use the Spacer Tool to adjust spacing between shelves. Position the peg
through the Spacer and tighten. Gently tighten pegs with the hex key
to desired position.