1
B
B
A
A
Leveler Foot
Hex Nut
Washer
90
O
B
.
Connect Post
Screw foot with metal wash-
er through bottom shelf and
onto the end of an extruded
post. Hand tighten fully then
use wrench on hex nut to tighten
nut onto underside of shelf.
A
.
Square Post
Square the post to the bottom shelf.
B
.
Gently tighten pegs and brackets
with the hex key to desired position.
A
.
Insert all shelf pegs and heavy
shelf brackets (SN40 only)
down each post.
Connect Posts to Bottom Shelf
WARNING:
Tighten by screwing the leveler foot NOT the post.
2
Add Shelf Pegs
WARNING:
If you are installing an optional door or drawer refer to
specific instructions before proceeding.
!
!
!
!
Doc No. 500-350 v6.20 3 of 4