Salamander Accent Lighting Systems [500-337 v7.16] page 3 of 4
INSTALLATION
1.
Select appropriate plug head and attach it to the power supply.
(NOTE: There are FOUR different international heads included)
2.
Connect IR Receiver and Power Supply to Digital Control Hub.
A. Mount Digital Control Hub in suitable location.
B. Connect Power Supply to Digital Control Hub
C. Connect IR Receiver to Digital Control Hub
(NOTE: It is important to place the IR Receiver in a visible location for the Remote
to interact with the IR Receiver)
3. Find Desired Location for Light Bars
For Most installations the best location is usually behind the object about 1-4 inches
from the outer edge. Try different positions for different objects until desired result is reached.
For Cabinet Installations- Light bars maybe installed vertically along cabinet sides or
horizontally under cabinet shelves.
4. Clean Mounting Surface and Install Mounting Clips
Clean the installation Surface free of dust/grease to assure the Two-Sided tape will
adhere well. Do Not use a solvent that will effect surface area. Remove paper on
one side of Two-Sided tape and adhere to back of bracket. Then removing the paper
on the other side of Two-Sided tape, place bracket to mounting surface and hold for
5 seconds. Insert Lighting Bars and plug into HUB
(Note: Screws are NOT to be fastened to electronics or sensitive surfaces.)
