Salamander Designs Lilliana, Руководство по сборке, Страница: 3 / 6

Lilliana - 500-922 v8/20 page 3 of 6
3
Connecting Seats to Arms
A.
Position chairs and connectors in
the location that they be installed.
Align front and back bolt holes.
(End Chair to Straight or Wedge Connector)
B.
Extend foot rest to access
front bolt holes and secure
connection by inserting bolts
through chair and into arm.
C.
Raise lower back panels
and locate the back bolt holes.
Secure connection by
inserting bolt through
chair and into arm.
Spacer
Spacer info:
• Spacers are needed when connecting seats to arms.
Each side of a seat that does not have an arm needs
a spacer.
• Spacers match the shape of the chair bases and are
attached along the side of the base.
Example: In a configuration of 4 recliners 6 spacers are needed.
B.
Connect power supplies
to motors.
Coil & Tie Extra Wire Length.
Be careful to route wires away
from mechanism.
2-pin adaptor cord