Salamander Designs FPS-Camera Mount Instructions 501.690 [ 11.18 ]
C
B
G (or) H
F
A
• From the rear of the header, connect the 2 (B) screws
loosely to the 2 (C) Weld Nuts. Do not tighten.
• Slide the open side of (F) Mounting Posts over the Weld Nuts
so that the Weld Nuts are captured inside of the Mounting Posts
With Mounting Posts at desired position, tighten screws using
Hex Key (A)
• Install Bracket (E) to bottom of Mounting Posts and secure
with screws (F).
• Align Speaker mounting locations with Mounting Bracket
slots (fasteners not included).
