SAL National Pty Ltd. 40 Biloela Street Villawood NSW 2163 ABN 21 633 189 474
Copyright SAL V16 JUL 2021 | www.sal.net.au
| Page 3 of 2
Pairing Instructions
How to pair with a PIXIE master device – without phone
1.
Make sure the PIXIE master device enters pairing mode. For most PIXIE master devices, quickly press the button 4 times will make it into pairing mode. For PIXIE smart
strip kits, long press the
“
Power button
”
on the remote will let it enter pairing mode.
2.
Quickly press the dial of PIXIE Multifunction Remote Control 4 times within 30 seconds, when the LED indicator flashes twice and keeps solid for 2 seconds, the pairing
is successful
How to pair with a PIXIE master device – with phone (Recommended)
3.
Make sure the PIXIE master device is added into the App, either PIXIE or PIXIE PLUS
4.
Stand close to the PIXIE Multifunction Rotary Control
5.
Launch the App, navigate to
“
Devices
”
, then find the PIXIE master device that needs to be paired, go to device detail page by pressing its icon
6.
Tap top right three dots, then tap
“
Pairing
”
in the pop-out list
7.
Quickly press the dial of PIXIE Multifunction Remote Control 4 times within 30 seconds, when the LED indicator flashes twice and keeps solid for 2 seconds, the pairing
is successful.
How to pair with a group – with phone only
8.
Stand close to the PIXIE Multifunction Remote Control
9.
Launch the App, navigate to
“
Group
”
, then select the group that needs to be paired, go to group detail page by pressing its icon
10.
Tap top right three dots, then tap
“
Pairing
”
in the pop-out list
11.
Quickly press the dial of PIXIE Multifunction Control 4 times within 30 seconds, when the LED indicator flashes twice and keeps solid for 2 seconds, the pairing is
successful
How to pair with a scene – with phone only
12.
Stand close to the PIXIE Multifunction Rotary Control
13.
Launch the App, navigate to
“
Scene
”
, tap top right three dots, then tap
“
Pairing
”
in the pop-out list, follow the guide in the app and select the preferred scenes,
then press
“
Confirm and Start Pairing
”
to start pairing
14.
Quickly press the dial of PIXIE Multifunction Rotary Control 4 times within 30 seconds, when the LED indicator flashes twice and keeps solid for 2 seconds, the pairing is
successful
Trouble Shooting
Case Issue
Suggestions
The LED indicator doesn’t light up
-Please check the wiring and make sure the wiring is correct
-Press the button 7 times see if the standby LED indicator was turned off
The LED indicator flashes after quickly pressing
the button 4 times, but it doesn’t pair, and
finally times out
-Please check if the PIXIE Multifunction Rotary Control is within the wireless signal range of the PIXIE
master device
-Make sure there is at least the PIXIE master device is in pairing mode prior to pressing the dial of PIXIE
Multifunction Rotary Control 4 times
The LED indicator shows it’s paired successfully,
but it doesn’t control
-Make sure the PIXIE Multifunction Rotary Control is within wireless signal coverage of the paired PIXIE
master devices (within 15 meters in open space, may require closer proximity depending on installation
environment)
-If it has to be beyond wireless coverage, please deploy PIXIE signal boosters between PIXIE
Multifunction Rotary Control and PIXIE master devices
Scan QR code or go to App store (IOS) or Google Play (Android) to download the free PIXIE
app to your smart phone. IOS: Requires IOS
6.0 or later. Compatible with iPhone, iPad and iPad touch Android: Requires Android 4.4 or
above, devices must support Bluetooth 4.0
Specifications above are for reference only and may vary without prior notice
