SAL National Pty Ltd. 40 Biloela Street Villawood NSW 2163 ABN 21 633 189 474
Copyright SAL V16 JUL 2021 | www.sal.net.au
| Page 1 of 2
IMPORTANT:
IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE INSTALLATION AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.
SAL products are designed in accordance with all mandatory International and Australian Standards, which require installation in
accordance with AS/NZS3000 by a qualified installer and regular cleaning and maintenance of the equipment. Products are sold
in accordance with the following instructions and SAL standard terms and conditions of sale, available via www.sal.net.au.
Due to continued product and information updates, product data sourced from sal.net.au shall not form part of any contract and or technical performance
guarantee unless expressly confirmed in writing by SAL at the time of order.
PIXIE MULTIFUNCTION ROTARY CONTROL
electrical and installation specification effective
15/11/2021.
Model No.
Input (V)/(Hz)
Min / Max loads(A)
Colour
Dimension L x W x H (mm)
Wireless
SMFR/BTAS
240/50
NA
Blue
54 x 24 x 24
Bluetooth Mesh Technology
Nominal frequency (Hz)
50
Product installation orientation
Horizontal wall mount
Operating ambient min/max (°C)
0 to 40
Product application
Interior residential or commercial
Operating humidity
10% to 85% RH, NC
Pixie connectivity
Yes
Storage ambient limit (°C)
0 to 40
IP rating*
20
Storage humidity
10% to 85% RH, NC
Attachment type
N/A
IP rating for interior products: The designated IP rating is “from below the ceiling” unless otherwise specified.
IP rating ALL products: Termination of the product must be made in accordance with the IP rating.
Brief Description:
The PIXIE Multifunction Rotary Control comes with a dial to enhance the interaction in the PIXIE smart home control. It’s a secondary device in PIXIE system, and
can pair with a PIXIE master device, a group, or scenes to achieve intuitive remote control.
Features:
1.
An advanced multifunction control device in PIXIE system
2.
Need active and neutral wire only
3.
Rotary dial for intuitive interactions
4.
Fits into most Australian wall plates, max. 6 gang installation
5.
Complementary long neck dial for other wall plates like PIXIE Ambience wall plates
6.
Can pair and control every PIXIE master device
7.
Can pair and control up to 2 scenes in PIXIE app
8.
Can pair and control up to 6 scenes in PIXIE PLUS app
Specific installation procedures
(if any):
Installation guide
1.
Switch off the mains power
2.
Wire it with active and neutral according to the cable color and wiring diagram. Blue
cable for neutral, red cable for active.
3.
Energize the product
4.
Pair it with a master device, a group, or scenes
5.
Start to use
Operations
LED Indicator
-The color of LED indicator is blue.
-The LED indicator is low light blue when standby
-The LED indicator flashes to highlight blue when the dial is pressed once
-The LED indicator keeps highlight blue when the dial is pressed and hold, or rotated
DIAL operation
General operation
Device operations
Function Description
LED Indicator
Remark
4 clicks
Enter pairing mode, to finalise
the pairing process with a PIXIE
master device, a group or a
scene
Quickly flash in blue for 10
seconds
Can pair with a PIXIE master device, a group or a scene.
After a successful pairing, pairing mode will end. Pressing
any button on this product during pairing mode will cancel
and exit pairing mode.
7 Clicks
Turn on/off the standby LED
indicator
-
Can toggle LED indicator on/off at standby mode
9 clicks
Reset the product to factory
default
Flash in blue for 3 seconds
All the previous pairing will lost after reset
