Mini Air Cooled Chiller
4
keeping water inside the unit, please keep the power on to protect the water from
freezing.
Don’t try to fix the unit by yourself. Any improper operation may cause trouble or
burn the unit. Please contact your local office or dealer to fix the unit if it is
necessary.
Attention
：
：
：
：
When the ambient temp. is lower than 16
℃
, the standard unit cannot
perform cooling. If the cooling is requirement under this condition, please mention it when
you place the order.
2. Installation
1.
Transportation
Keep the unit well packed before lifting the unit.
Please pay attention to the following items:
Carefully transport the unit and keep the unit
vertical
。
Avoid the unit been touched by other objects
while lifting. Standing under the unit or closely
to the unit is not allowed.
To avoid scratching the surface of the unit, put
gasket between the rope and unit.
2.
Installation
The base of the unit can be made of concrete. The unit also
can be set on the supporter,
which can be installed on the wall or pillar. An isolator pad should be used between the unit
and base.
Unit Installation
The unit can be placed on the balcony, ground or roof.
Please pay attention to the following points while installing the unit.
Keep enough space and good ventilation. Min. maintenance space refers to the drawing
No.2.
Make sure that the air discharge and noise won’t affect the neighbors and unit is not
installed facing strong wind.
Put rubber or spring isolators and level the unit.
Select the place where is easy for discharging water.
Put the unit close to the power supply plug to avoid large voltage drop.
Avoid keeping the outdoor unit exposed to sunshine or rain. If it necessary, use some
shelter if it will not affect the air discharge.
If use several units, keep at least 2M between each unit for keeping good heat exchange.
St r ong Ropes
Br acket s
（
Must be st r ong
and no def or amt i on.
）
Pr ot ect i on Pad
（
Must be st r ong
and no def or amt i on.
）