AF0-IF-013-00
15
(3)
After the Film
®
delivers the loading container to the
Prisma
®
, the dialog shown on the right appears on the
screen.
(4)
Open the door. Place 3 slide baskets prepared in
advance into the reservoir located at the far right.
Face the “UP SIDE” mark on each slide basket
toward the right when placing into the reservoir.
(5)
Touch the “OK” button.
(6)
After completion of the return-home movement, the
robotic arm goes and picks up slide baskets from the
start station. The robotic arm transfers baskets to the
loading container. After releasing them into the loading
container, the arm returns to its home position. After
the arm stopped at its home, the Film
®
returns the
loading container to its original position and begins
the coverslipping operation. When the Prisma
®
is in
operation, the “Running” dialog is on the screen.
(7)
When the first “Confirm link to Coverslipper” screen
appeared, touch the “BACK” button to return to the
menu screen.
Were the baskets properly transferred to the Film
®
? If not, adjust the basket transfer
position again.
