Before First Use
Test Run
Please read all use instructions thoroughly before
turning on and using your kettle.
1. Remove and discard any packaging material, promotional labels,
and tape from the kettle.
2. Remove the the kettle lid and fill the kettle with water to MAX 1.75L line.
3. Close the lid by pressing down on the lid knob until it locks in place.
4. Make sure the kettle base is plugged in, then place the kettle
on the base ensuring that it is fully seated.
5. Press the Preset selection button and select “Boil”. Once “Boil” reading
begin to flash on top of the screen it states that boilng cycle has started.
6. Once the boiling cycle is completed, the kettle will
beep to indicate that it has finished.
7. Lift the kettle off the base and discard the water. Repeat this process
one more time to ensure the kettle is clean and ready for use.
5