11
Setting up your Camera for Use
Battery Installation
Your camera requires three “AAA” batteries. To inset the batteries in the camera:
1. Slide the battery bolt to open battery door.
2. Load three AAA batteries correctly as the
polarity (+ and -) marked on the battery cover.
3. Close battery door.
Note:
When the camera is connected to the
computer, you can’t take photos.
Warning:
1. To avoid loss of photos in the camera due to
power loss, please don’t open the battery
compartment unless necessary.
2. Please download photos to your PC as often as
possible.
3. If the camera is idle for a long period of time,
please remove the batteries to avoid battery
leakage and corrosion.
Install PhoTags Express software and Camera Driver
1. Insert the CD into your CD-Rom drive. Make sure that your camera is not connected to the computer.
