Sakai PC800, Руководство пользователя

Страница: 25 / 40

3-003
INSPECTION AND MAINTENANCE
1-4. Vibrator
1) Stop the engine and keep the compactor level.
2) Remove the fill-drain plug to check that the oil spills out of the
plug.
3) Supply oil if it has been found insufficient.
How to change oil:
• Remove the belt cover, V-belts, and 4 bolts which secure the
base. Remove the upper parts which installed a engine, cage
from the body. Then remove the drain plug, Fill-Drain plug,
or the oil level gauge and tilt the compactor body to drain the
oil, then fill the new oil. Wipe off oil stuck on the outside of
compactor after oil change.
• Change oil at an interval of either one month or 200 operating
hours which comes first.
Specified oil quantity (when in replacement):
0.35 L (0.09 gal.)
1-5. Air Cleaner
1) Remove the wing nut from the air cleaner cover, and remove
the cover.
2) Remove the wing nut from the air filter, and remove the filter.
3) Remove the foam filter from the paper filter.
4) Inspect both air filter elements, and replace them if they are
damaged. Always replace the paper air filter element at the
scheduled interval.
5) Clean the air filter elements if they are to be reused.
• Paper air filter element :
• Tap the filter element several times on a hard surface to
remove dirt.
• Blow compressed air [207 kPa (30 psi)]
through the filter element from the inside.
• Never try to brush off dirt; brushing will force dirt into the
fibers.
• Foam air filter element :
• Clean in warm soapy water, rinse, and allow to dry
thoroughly.
• Clean in nonflammable solvent and allow to dry. Dip the
filter element in clean engine oil, then squeeze out all
excess oil.
PC800-03004
Fill-drain plug
Fill-drain port
PC800-03004
Fill-drain plug
Fill-drain port
AC-03001
Wing nut
Air cleaner
cover
Paper filter
element
Foam filter
element
Gasket
AC-03001
Wing nut
Air cleaner
cover
Paper filter
element
Foam filter
element
Gasket