Sunfree Series
- 46 -
Figure 6.2.4-27 Sell Energy Setup
To set up “AC Charge Setup” and “AC DisCharge Setup”, if not to add parameter,
the default will show no parameter, as shown below:
Figure 6.2.4-28 Add AC Charge/Discharge Setup
To set up AC Charge/Discharge parameter, in the interface of add “AC
Charge/Discharge Setup”, press or to select different edit box, press ENT to
enter edit status, press ESC to out edit status. With the alone parameter has selected
status, press ESC button to select current parameter, then edit these information by
or , as shown below.
Figure 6.2.4-29 Edit the AC Charge/Discharge Setup parameter
