SAJ H2 Series, Руководство пользователя

Страница: 10 / 22

(2) Mount ve ically or tilted backwards by max. 15°. Never install the inve er tilted forwards,
sideways, horizontally or upside down.
(3) Install the inve er at eye level for convenience when checking the LCD display and
possible maintenance activities.
(4) When mounting the inve er, please consider the solidness of wall for inve er, including
accessories. Please ensure the Rear Panel mount tightly.
To make sure the installation spot is suitably ventilated, if multiple SAJ hybrid solar inve ers
are installed same area.
50CM
Figure 3 . 2
Minimum Clearance
50CM 30CM
50CM
50CM
3 . 2
Mounting
Procedure
(1) Mark the Positions of the Drill Holes of the Rear Panel
The mounting position should be marked as shown in Figure 3.3.
(2) Drill Holes and Place the Expansion Tubes
Drill 4 holes in the wall (in conformity with position marked in Figure 3.4, and then place expansion
tubes in the holes using a rubber mallet.
Figure 3 . 4
Drill holes dimensions of H 2 inve er
Figure 3 . 3
Dimensions of rear panel of H 2 inve er
Φ8
14
6 m
m
16 mm
8 m
m
360 mm
360 mm
14
6 m
m
14 13
ROOFTOP SOLAR INVERTER INSTRUCTION MANUAL