Saivod SBS536DI, Руководство пользователя

Страница: 47 / 55

Note:
Connection of water pipes: please contact the after-sales Service
Department of the Company or professionals to install to avoid any
risk.
Warning!
The water pipes must be connected under the condition of power-off.
Electric shock may cause serious injury or death.
User shall determine whether to require an anti-reflux valve upon the
installation of water pipe. If required, user shall purchase it individually
and install a single-way valve or an anti-reflux valve on the joint of
water route, or make it installed by a specialized person
Notices!
The water pipe cannot be used where environmental temperature is
under 0, or it may lead to freezing.
The water pipe cannot be connected to hot water, which may lead to
deformation.
The water pipe should be used in the pressure range 30-100psi.
Lower pressure may cause smaller ice pieces and longer water exiting
time.
But higher pressure may damage the filter.
The pipe cannot be connected to drinks, alcohol or other liquids except
for water.
1. Turn off the water-tap.
2. Connect water pipe onto the water-tap. The water pipe should be
long enough to prevent the drop-off of the water pipe caused by
removing of refrigeratory.
3. Turn off the refrigeratory.
4. Use a connecting pipe to connect the water pipes behind the
refrigeratory and on the water-tap.
5. To prevent the drop-off or leaking of the water pipes, they must be
fixed by fixed pins.
Operation and precautions for ice maker & water
dispenser
GB
Connection of the icy maker and water facility
The water pressure of combined fridge- freezers is 2 - 7 bars. If
water pressure is too high, please install a decompressor.
Please consult the water works for water pressure if you connect the
refrigerator with public water supply network like many families.
Please do not connect combined fridge- freezers to a tap or a tap of
water heater.
Please do not bend inlet pipes and drain-pipes when placing, and
shall carefully connect water pipes.
Do not use any old and used water pipes.
If accessory water pipes are too short, please order longer water
pipes from our Technical Services Division rather than use extension
pipes.
You should prepare a tap with “3/ 4 inch” screwed joints for water
supply system.
1. Push the terminal 14 of blue flexible hose of adapter into the 3/ 4
inch screwed joint 13.
2. Fasten the 3/4 inch screwed joint 13 to the tap.
3. Pull out the nut 16 from white flexible hose of the equipment.
4. Push the terminal of white flexible hose of the equipment into the
hose connector 15.
5. If necessary, please rivet the flexible hose onto wall to avoid
stumbling.
6. Carefully unscrew the tap to check whether the pipe line is sealed.
87
88