Saivod FH-09, Руководство пользователя, Страница: 21 / 24

FAN SETTING
This Switch engages both fan and heater, fan speed can not altered and will always remain constant. To use this
appliance as an air circulator, set the power switch to setting.
I SETTING
The I setting, powers 1000W to the heater elements. This settings is best suired to smaller, well insulaterd ares
that require less warming to maintain temperature.
II Setting
The II setting, powers 2000W to the heating elements, delivery repid warming air to quickly increase the
temperature in a given area. To adoid overload situations, it is recommended that no other appliances are used at
the same time on the same power outlet.
THERMOSTAT DIAL
To find the ideal thermostat setting for you, first set the dial to maximum position. As soon as the temperature is
comfortable, turn the thermostat to the direction of munimum position slowly, until the heaters goes off.
THERMAL CUT-OUT
A Thermal Cut-Out is built into this heater to Minimise the risk of overheating and maximise safety to users.
A heat sensing device monitors internal temperatures in the appliance. If heat levels rise beyond a preset safety
threshold the Cut-Out will switch off power to the heat elements and fan motor, eliminating further danger. Let
the heater cool for approximately 10 minures, then it will function normally again.
MAINTENANCE AND CARE
Unplug from the power supply and allow the appliance to cool down.
Wipe out with a soft damp cloth. Do not use detergent or abrasives.
DO NOT attempt to clean the interior of the heater.
Store the appliance in a cool, dry place.
CORRECT DISPOSAL OF THIS PRODUCT
When the time comes to eliminate this product, please consider the environmental impact and take it to
recognised recycling facility instead of disposing it with general household waste. Take the equipment to a waste
disposal site. Plastic and metal parts that are used in the construction of this appliance can be separated into
FH-09.indd 21 7/16/2015 5:55:49 PM