Caution!
Before troubleshooting, disconnect the power supply. Only a qualified electrician of
competent person must do the troubleshooting that is not in this manual.
Important!
There are some sounds during normal use (compressor, refrigerant circulation).
Problem
Possible cause
Solution
Appliance dose not work
Mains plug is not plugged in or is
loose
Insert mains plug.
Fuse has blown or is defective
Check fuse, replace if necessary.
Socket is defective
Mains malfunctions are to be corrected
by an electrician.
Appliance freezes too
much
Temperature is set too cold or the
appliance runs at
“
7" setting.
Turn the temperature regulator to a
warmer setting temporarily.
The food is not frozen
enough
Temperature is not properly
adjusted.
Please look in the initial Temperature
Setting section.
Door was open for an extended
period.
Open the door only as long as necessary.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
Turn the temperature regulation to a
colder setting temporarily.
The appliance is near a heat source. Please look in the installation location
section.
Heavy build-up of frost
on the door seal.
Door seal is not air-tight.
Carefully warm the leaking sections of
the door seal with a hair dryer (on a cool
setting). At the sametime shape the
warmed door seal by hand such that it
sits correctly.
Unusual noises
Appliance is not level.
Check the appliance and level it by some
articles.
The appliance is touching the wall or
other objects.
Move the appliance slightly.
A component, e.g. a pipe, in the side
of the appliance istouching another
part of the appliance or the wall.
If necessary, carefully bend the
component out of the way.
If the malfunction shows again,contact the Service Center.
These data are necessary to help you quiskly and correctly.Write the necessary data here, refer to
therating plate.
1
7
Содержание AT1123N
Страница 2: ......
