11
1.
Select the appropriate nozzle and attach it to the end of the short
stainless steel wand.
2.
Attach the other end of the short stainless steel wand to the gun
outlet and pre-tighten.
3.
Adjust the wand to make sure the nozzle is aligned with the gun
(pointing down) and tighten securely. (It is applicable for the
elbow nozzles)
Option 4 - Using the stainless steel telescopic lance.
See Figures 7 and 8.
1.
Select the appropriate nozzle and attach it to the end of the
telescopic lance.
2.
Attach the other end of the telescopic lance to the gun outlet and
tighten securely.
3.
Loose the lance locknut and pull out or push in to adjust the
extension length of
telescopic lance per your working distance and
height, then, tighten the lance locknut securely.
4.
Rotate the nozzle until it is aligned with the gun (pointing down)
and ready for use. (It is applicable for the elbow nozzles).
5.
Pull on the spray lance to be certain it is properly secured.
Operating PPS Pro
Use safety equipment. Protect your eyes, skin, and lungs while
mixing, filling, spraying, and cleaning. Failure to do so may result in serious
personal injury and damage to
property.
Always remove battery pack from your gun when you are
assembling parts, making adjustments, cleaning, or when not in use.
Removing battery pack will prevent accidental starting that could cause
serious personal injury.
Make sure the Flow Rate Control Knob is directed to the “OFF-
ON” position before inserting the battery pack.
If used for applying sealers, deck stains and other coating
products, always rinse the gun using a Sodium Hydroxide based deck
stain stripping product.
