10
3 Assembly and commissioning
The machine is delivered fully equipped. It is ready for operation after assembly the diamond blade
and after connection to the appropriate power supply.
3.1 Assembly on the folding frame
Lift the machine from the side of the handles (opposite to the cutting head) and unfold the
legs. Then lift the other side and unfold the other pair of legs. Make sure that you don’t trap
the cable and water hose between the machine and the water tray.
Put the locking plate in the pin and tighten the knob in order to prevent folding of the leg.
3.2
Handles assembly
In order to lift the machine easily, assemble the two handles on the side of the machine with
bolts.
3.3 Cutting head
Assemble the cutting head handle with two screws.
