SAINT-GOBAIN Norton Clipper CS 451 D7, Руководство по эксплуатации

Страница: 20 / 32

VERS.2015.07.21 CS 451 D7_MAN_EN
20
6
MAINTENANCE AND SERVICE
CAUTION: to perform maintenance of the machine, always switch it off. Always wear a mask and
safety goggles while performing the maintenance of machine.
6.1 Maintenance of the machine
To ensure a long-term quality from the cutting with the CS 451, please follow the maintenance plan
below:
Regular service period
Perform at every
indicated period

Aft
e
r o
n
e
h
o
u
r o
f
w
o
rk
Be
g
in
n
in
g
o
f
th
e
d
a
y
Duri
n
g
to
o
l c
h
a
n
g
e
En
d
o
f
th
e
d
a
y
O
n
c
e
a
we
e
k
Aft
e
r a
fa
ilu
re
Aft
e
r a
d
a
m
a
g
e
Whole machine
Visual control (general
aspect, sealing)
Clean
Flange and blade fixing devices Clean
Belt tension Control
Water hoses and nozzles Clean
Depth screw Grease
Engine housing Clean
Reachable nuts and screws Tighten up
Adjustment and replacement of the belt
After one hour of work, the belt heats up and stretches. Therefore, you have to re-tighten it.
To adjust the belts, firstly remove the belt guard by unscrewing the 4 screws. Loose the screw
maintaining the tensioning device with the 17mm wrench. You can know re-tension using a 36mm
wrench to turn the tensioning device. Retighten the maintaining screw, and re-assemble the belt
guard.
To replace the belts, loose the screw maintaining the tensioning device and turn the tensioning
device in order to release the belt. Adjust the belts and retighten them by moving the tensioning
device back on the belt with the 36mm wrench then retighten the maintaining screw of the
tensioning device.
Lubrication
The CS 451 uses life-
lubricated bearings. Therefore, you don’t need to lubricate them at all.
Grease the depth screw once a week.
Cleaning of the machine
Your machine will last longer if you clean it thoroughly after each working day.