SAINT-GOBAIN NORTON clipper CDM 354, Руководство пользователя

Страница: 7 / 16

VERS.2023.03.09 CDM 354_MAN_EN
7
2.2 Machine plate
You can find important information on the following plate attached to your machine:
2.3 Safety instructions for particular operating phases
When using the machine, always respect the following safety instructions to avoid the risk of
shock, injury and fire. Carefully read the information provided and heed the advice before
using the machine.
Prevent Electric Shock
A grounded electric motor with water cooling should only be used if the supply system and
the equipment are fully grounded and connected to the mains via a protective grounding in
good condition. operating mode (PRCD or differential circuit breaker). The residual current of
the protective ground must not exceed 10 mA. Test ground protection before use!
Prevent water-electricity contact
Prevent disconnection or leakage of the water supply hose. When drilling overhead, always
consider cooling water. When drilling overhead, always use a water collector. For work on
walls, the use of a water collector is recommended (available as an accessory). Always
dispose of water safely, for example with a wet vacuum cleaner. Cords, plugs and electricity
must not come into contact with water.
Stay constantly vigilant
Always concentrate on the work, use your common sense and do not operate the machine if
you are not concentrating. Make sure that you are always able to stop the engine quickly.
Machine model Code of the machine
Max. diameter depending
on the selected speed
Serial number
Speed
Power
Acceptable current and frequency