17
NAME
QTY.
Step 8: Running part (Y Axis) Installation
NO.
Operation
Steps
Prepare
materials
BEFORE
AFTER
CODE
Tools
Check
Remind
Stepper motor Assembly (from Step1)
M3 Bolt M3 x 14mm
Base (from Step6)
Lead Screw assembly (from Step7)
MX3-52
1
4
1
1
Allen wrench (2mm, 2.5mm, 4mm)
Put the Lead Screw assembly into The Base, insert the end of the
Lead screw to the hole of Phenolic resin plate-B,
put another end
of the screw insert into the bearing by force, which loacted in the
middle of the Phenolic resin plate-F.
At the same time,make the steeper motor assembly install on the
Phenolic resin plate-B,insert the lead screw to the coupling of motor
assembly. tighten the M3 Bolts of motor,don't forget the small screw
in the coupling.
When you finish the steps here, you should to check the Horizontal
and Vertical, if you have not any professional tools, you can stand
the base, observe the Bearing mount fall dow smooth, if not that
you have to check the vertical of the Guide Rail.
Finish check and fix the base, you can tighten all the bolts
(remember that we remain 20% space before)
1
2
3
4
1
2
1
1
1
MX3-13
MX3-52 x 4Pcs
Phenolic
resin plate-B
Phenolic
resin plate-F
