Saimo 6101, Руководство по эксплуатации и обслуживанию

Страница: 33 / 101

6101 6101 6101 6101 Belt Belt Belt Belt Scale Scale Scale Scale Integrator Integrator Integrator Integrator Operating
Operating Operating
Operating and
and and
and Service
Service Service
Service Manual
Manual Manual
Manual
27
Chapter
Chapter Chapter
Chapter 3
3 3
3
Operation
Operation Operation
Operation
3.1
3.1 3.1
3.1 Run
Run Run
Run Menu
Menu Menu
Menu
3.1.1 3.1.1 3.1.1 3.1.1 General General General General
Integrator 6101 is a microprocessed instrument, which can receive speed and weight signal,
provide visual signal and electric output signal for usage of toal and flow rate display.
Integrator provides up to 8 strain resistance type load cell with 10VDC excitement voltage
and provides 6 core load cell with compensation signal terminal.
When conveyor is running with empty loading, auto zero track function let belt scale system
auto zero. Cause such function is not necessary for some application, so zuto zero track
function can be selected via menu. Belt feeder control output can be PID control.
If power supply is stopped, RAM data storage will last over 20 years.
If any error occurs in initial calibration, it must be checked for reason and corrected
accordingly. In normal operation, error means that there is fault in system or incorrect
operation is made.
3.1.2 3.1.2 3.1.2 3.1.2 Front Front Front Front panel panel panel panel
There are LCD and keyboard located in front panel for operator ’s operation.
Front panel operation, zero calibration, span calibration will be described in this chapter as
shown as below figure (3-1)
Figure 3-1 Key arrangement
3.1.3
3.1.3 3.1.3
3.1.3 Keyboard
Keyboard Keyboard
Keyboard
1. “RUN” – enter the running menu, the integrator can enter the running mode whenever the
key is pressed, see section 3.5 for details.
2
、
“MENU” – enter the main menu, see section 3.4 for details.
3
、
Up , Down arrow – scroll down & up in selected menu