www.sailwinlight.com
7
Correct Use of Specifications
Live plug-in is not allowed
After starting the device, press the "FUNCTION" button (that is, the first button on the
screen), observe for 3-5 seconds to determine whether the temperature is rising
normally.
After the equipment has been kept at constant temperature, please idle for 25 seconds
before putting powder in it. Keep in mind that the powder cover must be covered well
after the powder is put in.
After the above operation, please make sure to start the equipment at low speed and
spray out flowers at the spray outlet, that is, the preparatory work is completed.
After using the equipment, try to use up the consumables. If the consumables are
used up, please idle the equipment for 25 seconds before the power can be cut off.
After the above operation, remember to cover the fireworks pollen and store them in
dry environment.
If the fireworks pollens are not exhausted and need not be idled, please cover
the consumables immediately (storage time should not be too long, it is
recommended not to exceed 2 days).
In the cold or humid environment, it is strongly recommended not to leave
consumables in the equipment. After using, the equipment must be idled for
25 seconds and stored in a dry environment!
Control instructions
