manualshive.com logo in svg

Sailor Sailor System 5000 MF/HF, Руководство пользователя, Страница: 42 / 56

Поделиться
Скачать
Sailor Sailor System 5000 MF/HF Скачать руководство пользователя страница 42

34

Detail

Send Mesg (F5):

Transmits (prints in Standby) the edited message.

WRU (F6):

During ARQ communication only: Requests the other station to
transmit its answer-back code.

DE (F7):

Transmits own answer-back code, see the configuration printed
when entering telex mode.

Over (F8):

Changes the direction of an ARQ connection.

Break (F9):

Terminates a connection. Responds by printing ‘Breaking connec-
tion’. If pressed during transmission of an edited message this is
terminated. Press once more to terminate the connection.

On/Off (F10):

Switches the GMDSS telex On/Off. The ‘Standby’ keyboard indicator
lamps gives out steady light when the switch on process is finished.
Call codes, MMSI number and answer back code are printed.
Telex will automatically be turned on, when entering telex mode on
the control unit.
If F10 is pressed while in a connection, the key press will have same
effect as Break (F9).

The following distress frequencies only takes effect when not in a
connection.

2174.5 kHz (Ctrl+F1): Selects the distress frequency 2174.5 kHz.
4177.5 kHz (Ctrl+F2): Selects the distress frequency 4177.5 kHz.
6268 kHz (Ctrl+F3):

Selects the distress frequency 6268.0 kHz.

8376.5 kHz (Ctrl+F4): Selects the distress frequency 8376.5 kHz.
12520 kHz (Ctrl+F5):

Selects the distress frequency 12520.0 kHz.

16695 kHz (Ctrl+F6):

Selects the distress frequency 16695.0 kHz.

Bell (Ctrl+F7)

Transmits Bell character.

6.2.2

Switching On

Switch on the printer (The ‘Select’ printer indicator must be on). Select telex mode in the
Frequency Display of the control unit, then telex will be started after 2 seconds. The delay
allows the user to toggle through the modes without printing the configuration as described
below.

The ‘Standby’ keyboard indicator lamp shines steady light when connection to the telex
modem is established and the following text appears on the printer (example):

5-digit call code:

12345

MMSI number:

123456789

Abbreviated ID:

123456789 abcd x

6.2.3

Switching Off

When pressing the F10 key, radiotelex will be turned off and the standby lamp will turn off. If
the user is in a connection or sending a message, the key press will have same effect as
Break (F9).
If radiotelex is switched off by pressing the mode button on the control unit, any current
connection will be interrupted.

0725

Содержание Sailor System 5000 MF/HF

























































Отзывы:

Нет отзывов