background image

5

Channel Control

Setting the VHF channel can be done in three ways by means of the
numeric input keys (sequentially) or by means of the function “next
channel up/down”, or by using the quick select key “16”:

Numeric keys:
Press the numeric input keys (sequentially) until the desired channel
number is shown on the handset display:

Ex:

 

If private channels are available in your VHF system, a private
channel number is selected by pushing the buttons:
Ex: Private channel 23

 

 

 

Next channel function:
To select the next channel up or down (starting point is displayed
channel).

Push 

 

The next channel function is active until the key
is released again, toggling through the
channels as long as pushed.

Quick select key:
Press the key

.

  16

 1  10  03

MEM

VOL

SQ

 P23

 0   09  01

MEM

VOL

SQ

    71

 0   10  03

MEM

VOL

SQ

    71

 0   09  01

MEM

VOL

SQ

Squelch Control

Manual squelch level setting:
Set the squelch sensitivity of the receiver by buttons

 

Press 

 for more than 4 seconds and the squelch level goes

up/down automatically.

The squelch setting is shown on the display below the “SQ” symbol.

Automatic squelch level setting:
The VHF system automatically sets the optimal squelch level to
mute the background noise level.
To set squelch level automatically:

Press 

 

     6

 1   08  02

MEM

VOL

SQ

Содержание A1 VHF-DSC





























Отзывы: