Sail Pro Bullet HD, Руководство пользователя

Страница: 3 / 15

INITIAL SET UP
1. Make sure the camera is OFF before adding or removing
the memory card!
2. Screw out the rear cap (open) located at the back of the
camera (3) .
3. Install a 4, 8,16 or 32 GB Micro SD memory card (Optional)
into the rear slot. To insert the micro SD card, slide the micro
SD card into the card slot on the back of the camera with the
card label facing down. The SD card will click into place once
it is inserted past flush with the camera. Use your fingernail to
do this. Then screw in the rear cap till is complete lock.
4. If “no” SD Memory card is inserted into the camera, a
Red/Green LED light on top of the camera will blink.
5. The Micro SD memory cards must be clean (no images
from other sources). If you are using the Micro SD memory
card from other cameras, please make sure to format the SD
memory card in your computer prior to use in the camera.