SAIC
-
PDI Operation Instruction_ZS11E_V1.0_201903
Page 6 of 14
the door, then pull the door handle to open the door.
★
The following inspections require to turn on the
ignition switch (the key is placed in position 2)
Special Tip: There are many electronic devices on the
vehicle with great power consumption, so
when each inspection is completed, be sure to
turn off the corresponding switch and do not
use the electronic devices for an extended
period of time to avoid battery drain!!
II. Instrument Pack Inspection
1. Message Centre Setting
1)
The message centre provides the followings:
2)
Press the LEFT/RIGHT button on the right of the
multifunction steering wheel to shift the display
items.
3)
Press the OK button on the right of the multifunction
steering wheel to confirm or reset.
4)
Press the UP/DOWN button on the right of
multifunction steering wheel to make adjustment.
2. Instrument Warning Lamp
1)
Switch on the ignition, confirm that all warning lamps
will be illuminated to conduct the self-check.
2)
Switch on the ignition, confirm that the following
warning lamps remain on upon completion of the
self-check; and they will be extinguished after the
vehicle starts.
Battery Uncharged Warning Lamp
Power Battery OFF Warning Lamp
3.
"READY" Indicator and Power Indicator
1)
After the vehicle is started, the "READY" indicator on
the instrument panel is normally illuminated.
"READY" will be displayed when the vehicle is
powered on.
The general message provides the followings:
1. Trip Computer
2. Settings
3. Navigation/Music *
4. Failure Message
