SAIC MOTOR MG HS, Руководство пользователя

Страница: 146 / 319

Seats & Restraints
pretensioners.(see ‘Warning Lamps and Indicators' in the
‘Instruments and Controls’ chapter).
The seat belt pre-tensioners can only be activated once,
after activation they must be replaced.
This may also
involve replacement of other SRS components. Please
refer to 'Replacing Airbag System Parts'.
IMPORTANT
• Seat belt pre-tensioners will not be activated by
minor impacts.
• The removal or replacement of a pre-tensioner must
be carried out by the manufacturer trained, dealer
technicians.
• 10 years from the initial date of registration
(or installation date of a replacement seat belt
pre-tensioner), some components will need to
be replaced. The appropriate page of the Service
Portfolio must be signed and stamped once the
work has been completed.
Seat Belt Checks, Maintenance and
Replacement
Seat Belt Checks
Split, worn or frayed seat belts may not
function correctly in the event of a collision,
if there are any signs of damage, replace the
belt immediately.
Always ensure the red release button on the
seat belt buckle is pointing upwards to ensure
easy release in the event of an emergency.
Please follow the instructions below to check the seat belt
warning lamp, seat belt, metal tab, buckle, retractor and
fixing device regularly:
• Insert the seat belt metal tab into the corresponding
buckle and pull seat belt webbing close to the buckle
quickly to check that the belt clasp locks.
• Hold the metal tab and pull the seat belt forward quickly
to check that the seat belt reel locks automatically,
preventing the webbing from extending.
132