Saia-Burgess
Controls Ltd.
Manual PCD7.D23x│Document 26/795; Edition E7│15.04.2005
Software
All commands
4-10
4
PCD7.
Parameters
new
Compatibility
D232
D231
D230
Commands
dec. hex. 1
2
3
4
5
6
7
cds. D100 D1x0 D202 D250 D79x
F
F
F
Call terminal confirm-
ation display
27
1b
Y
<EOT>
x
F
F
F
FTP clear screen (2)
27
1b
Z
<EOT>
x
D/F
D/F
D/F
Display ASCII charac-
ter
9
) and move
32
to
126
20
to
7e
x
x
x
x
D/F
D/F
D/F
Backspace
127 7f
x
x
x
x
D/F
D/F
D/F
Display upper code
page character
10
) and
move
128
to
255
80
to ff
x
x
x
x
x
1
) size: (0) 1...20 Number of character fields that are used
2
) percentage: (0)1...100 Fill in / Add / Scroll percentage
3
) fill data, pixel data: Binary pixel data for a 1 pixel wide, 8 pixel high column.
‘1’ corresponds to black. The least significant Bit addresses the upper pixel.
4
) Y-cursor, X-cursor: character field position with ASCII offset 0x20 (32).
Y is used for the horizontal (0x20...0x33) , X for the vertical (0x20...0x27) position
5
) symbol_id: (0) 1...100: selects a stored symbol number
6
) symbol_line: (0)1...7 / (0)1...2: selects a line (18 x 8 pixel) of the stored symbol,
7
) id_select: ‘0’ (0x30), ‘1’ (0x31) selects the first or the second symbol ID
8
) FTP code: 2 Byte BCD code with ASCII offset. ‘00’ coded as 0x32 0x32.
See Chap.4.4 for details
9
) Standard ANSII character, not software selectable. The terminal can write the symbol in negative and default not negative mode and moves one
position further with next line / home switch after writing.
10
) Upper page character. The default code page setting is DOS-437 which is compatible with the earlier SBC terminals for all languages (French,
German, Scandinavian). Beside that alternative code pages can be selected.
The terminal can write the symbol in negative and not negative mode (default) and moves one position further with next line / home switch after
writing.
F
FTP command
D
Direct command
D/F
Direct & FTP command
D/S Direct and Setup command
