Saia-Burgess Controls AG
Bahnhofstrasse 18, 3280 Murten, Switzerland
Tel +41 26 580 30 00, Fax +41 26 580 34 99
www.saia-pcd.com
PP26-058_ENG01
2018-04-25
Remote control PCD7.L65T-RC5x
1.
Pairing Menu
Connect the radio-frequency device to your regulator’s DALI network
Turn on the remote control unit by pressing the “occupation” button
Press the following 2 buttons simultaneously: “light” and “occupation”
The pairing menu should come on
The distance [between the remote control unit and the pairing device] should be between 1 and
2 metres
The remote control unit should be
in an upright or horizontal position
as indicated in the above
diagram
Start the pairing by pressing the OK button
o
The remote control unit searches for devices situated at a distance of 3 to 4 metres
o
All MCs responding to the remote control unit will have their green LED lit
o
Once the search is completed (approximately 10 s), use the ± buttons to select a device and press OK to
confirm (
the selected device should have the RSSI which is closest to zero
)
If the device is flashing:
(only applicable to PCD7.L66D-MC72V)
o
If the device’s LED is flashing red and green: press the OK button
o
If not, press the RET button and select another device using the ± button
o
If none of the devices detected is the one you wish to connect to, press on “Occupation” again
(this function might not be available in all remote control versions)
At the end of pairing
o
If pairing is successful, “pairing OK” will be displayed on the screens: press OK to confirm
o
If pairing is not successful, the screen will display “pairing NOK”: press the RET button to try again
Before you can pair with a new device, existing pairing configurations must be cleared from
both the remote control unit and the MC device.
2.
Clearing the pairing memory
Connect the radio-frequency device to your regulator’s DALI network
Turn on the remote control unit by pressing the “occupation” button
Press the + and – buttons simultaneously and hold them for 1 second
The sign “!” will appear in the top left corner of the screen
Press the + and – buttons simultaneously again and hold them for 1 second
The “config BA” menu will be displayed
Press the “light” and “temperature” buttons simultaneously
Select “config Radio” from the menu, using the + and – buttons and press OK to confirm
Select the “Delete AC” menu using the + and – buttons and press OK to confirm
o
The remote control unit searches for devices situated at a distance of 3 to 4 metres.
o
Once the search is completed (approximately 10 s), you can select the desired device by using the ± keys.
Press OK to confirm.
o
If the device is flashing:
If the device starts to flash: press the OK button
If not, press the RET button and select another device using the ± button
!
