17
Copyright. Sygnal 2018
Figure 23 –Green indicates the
zone is active, but not currently
required.
Figure 24 –Blue indicates the zone is
active and in cooling mode.
Figure 25 –Red indicates the zone is
active and in heating mode.
5.2 Using the Single Button Capacitive Touch Room Controller
The Single button room controller is an easy to use on / off controller for your room or zone. It has a built in
temperature sensor with a central button for turning a zone on or off. If the zone is switched off, the LED
indicator around the capacitive touch button will be turned off. Otherwise the LED indicator has three
different colours that signify different operations:
a) Green – Indicates the zone is active, but it is not currently needed as the room is at temperature.
b) Blue – indicates the zone is active and running on cooling.
c) Red – Indicates the zone is active and running on heating.
5.3 Climatepoint Hybrid switches (2, 3, 4, 6 button)
Sygnal’s Hybrid Capacitive touch button switches are to be used in conjunction with Sygnal’s Lightpoint
systems, allowing the user to operate both Air Conditioning and Lighting in one easy to use capacitive touch
wall controller. The Air conditioning button will always be located at the bottom or bottom right of the wall
controller depending on which wall controller you have, this button Red for Heat, Blue for Cool and Green for
when room is at temperature.
Example of a 2 button wall
controller.
