As the reel lift has ball bearings, the reel will rotate slightly when cable is being
pulled off.
Make sure you respect safety distances and that the reel does not get out of control
or start to sway dangerously.
To reduce these phenomena, you can attach a reel brake (item no. 7152-1000) as an
accessory. This reel brake fits 7152-1012 and 7152-1022.
1. When you have finished pulling off cable, place the reel on a flat surface.
2. Remove the lifting equipment from the reel
lift's bracket.
3. Hold onto the fluted sleeve of the reel lift
and lift straight up.
4. The reel lift will now automatically fold up
and can be taken out of the central hole.
