Calibration
•
At the computer, look along the taskbar at the bottom of the
screen. From the taskbar on the bottom right hand side of the
screen, locate the icon :
Hover cursor over the icon and perform a right mouse click, scroll
cursor up to “Settings” and left click on the word “Settings”.
•
From the next screen that appears make sure the word
“Interactive” is selected (in the left hand pane) and left click on
the word calibrate (in the right hand pane).
•
The projected image on the Cleverboard 3 will change to a white
background with a black cross in a red circle, take the interactive
pen and press perpendicularly to the screen, chase the crosses
around the board, on the 9
th
cross the screen will change, press
“OK”
•
The board is now calibrated and when the pen is touched to the
screen in each corner the curser should follow and lie directly
beneath the pen nib. If it does not, repeat the process above.
•
You are now ready to use the board interactively with Lynx
Software.
