sahaga POPtube, Руководство пользователя, Страница: 43 / 56

Using your POPtube
43
1. Press and release the MENU button to enter the menu options.
2. Press and release the or button to scroll to <DRC>. Press and release the
SELECT button. The current DRC setting will be highlighted.
3.
Press and release the or button to scroll through the options available and
press and release the SELECT button to confirm.
FM Radio mode
If you are not already in FM mode, press and release the MODE button to go to FM mode
(check the display).
If you were listening to an FM station when you switched the radio off then this station will
be automatically selected when you switch the radio back on.
Tuning to an FM station
• Press and hold the button to scan up the frequency band.
• Press and hold the button to scan down the frequency band.
• Press and release the or button to fine tune each frequency in 0.05MHz steps.
Note: If reception is still poor try moving the radio to another location.
Changing the Scan setting
In FM mode:
1. Press and release the MENU button to enter the menu options. <Scan setting> is
displayed. Press and release the SELECT button.
2. The current Scan setting will be highlighted.
There are two different options to choose from:
•
Strong stations only
- The scan will only stop when a strong signal strength is
received which should also result in a better audio quality. It is possible that the
station you are scanning for may be missed using this option.
• All stations - The scan will stop for every station it receives, even if the signal
strength is poor.