RESPIRATORY PROTECTION
FILTER
TECHNICAL
SPECIFICATION
This complete breathing system includes a belt, pocket regulator,
coalescent filters to remove low levels of moisture and oil, along with
10m of breathing hose and a 1.5m spray gun hose.
Protection will only be offered if the unit is fitted correctly.
The filter will not remove Carbon Monoxide or other toxic gases. The filter changes to red when
contaminated and must be changed immediately.
The unit is not designed for use in atmospheres containing flammable gas mixtures.
The unit is designed for use against contaminants, which are not immediately dangerous to life
and health or where self-contained breathing apparatus is not essential.
The unit, when in contact with the skin may cause allergic reactions to susceptible individuals.
If this occurs leave the hazard area, remove and seek medical advice.
Weight without filters:
Weight with filters:
Height:
Length:
Width:
463 g. (Approx.)
483 g. (Approx.)
175 mm.
140 mm.
45 mm.
LIMITATIONS OF USE
DIMENSIONS OF PRODUCT
• Zamak body • Carbon element
• Polycarbonate bowl
•
Complete with Nitto high flow fittings
MATERIALS - CARBON FILTER
4240
+ BELT REGULATOR
+ 10M BREATHING HOSE
FACE
MASK
Supported in Australia by:
www.axalta.com.au
1800 292 582
