- 36 -
Die Druckluft-Auspresspistolen der neuen
Serie 3900 Plus und 3900 Plus M bieten eine
kompakte, effiziente und leichte Lösung, um
die Grundbedürfnisse der Werkstatt wie z. B.
bei der Montage von Baugruppen,
Reparaturen oder dem Einbau von
Glasscheiben abzudecken. Zum Auftragen
von Dichtmittelraupen, Silikon und
dickflüssigen Dichtmassen.
Sowohl die Kartuschen- als auch die
Beutelausführung besitzt einen
Druckluftauslöser mit Schnellauslassventil für
eine präzise und kontrollierte Anwendung des
Produkts.
Die aus Metall gefertigten Innenteile
gewährleisten eine lange Lebensdauer und
erfordern keine Anpassungen oder Wartung.
Gehäuse aus hochfestem Aluminium und
Frontverschluss der Kartuschenausführung
aus unverformbarem Kunststoff. Das
hochrobuste Produkt wurde für hohe
Arbeitslasten ausgelegt.
6. FUNKTIONSBESCHREIBUNG DES GERÄTES
· Vor dem
Wiederbefüllen der
Druckluft-Auspressp
istole muss diese
von der
Druckluftleitung
getrennt werden..
· Anschließend muss die Frontkappe der
Auspresspistole entfernt und das
Nachfüllprodukt in die Pistole eingeführt
werden, sodass der Kolben wieder in seine
Ausgangsposition gebracht wird.
HINWEIS: Der Auslöser darf dabei nicht
betätigt werden.
· Schließen Sie die
Pistole ans Luftnetz.
· Die Produktmenge
wird durch Drehen
des Reglers
eingestellt.
7.1 Vorbereitung der Patrone (3900 PLUS)
1. Entfernen Sie die
Enden der Kartusche
und der Düse oder
schneiden Sie die
Festdüse mit einem
scharfen Messer an
dem gewünschten
Punkt und mit dem
benötigten Winkel ab.
2. Befestigen Sie die
Düse an der Kartusche
(falls vorhanden).
3. Entfernen Sie die
Frontkappe des
Behälters und setzen
Sie die Kartusche in
die Pistole ein.
4. Montieren Sie erneut die Frontkappe und
stellen Sie sicher, dass sie den Behälter korrekt
verschließt.
7. INBETRIEBNAHME