Sagitter SG H1500, Руководство пользователя

Страница: 18 / 24

18
4.3 - CONNECTION TO THE DMX CHAIN
Use a cable conforming to specifications EIA RS-485: pole twisted, shielded, 120Ohm
characteristic impedance and low capacity (PROEL DMXD – DMXD1).
Do not use microphone cable or other cable with different characteristics than those
specified. Terminations must be made with male / female XLR 3-pin connectors. You must
enter on the last device a terminal plug with a 120Ohm resistance (min1 / 4 W) between
terminals 2 and 3.
IMPORTANT: The cables must not come into contact with each other or with the metal
housing of the connectors. The housing itself must be connected to the shield braid and to
pin 1 of the connectors.
5. - SETUP
5.1 – MENU
WAIT TIME 1 – 600 Time between 2 smoke outputs
START TIME 1 – 600 Time of smoke output
SMOKE VOLUME
OUTPUT
1% – 100% Quantity of smoke output
PUMP ADJUST
SMOKE OUTPUT
1% – 100% Power of the pump
FAN ADJUST AIR
VOLUME
1% – 100% Fan’s speed
DMX ADDRESS 001 – 511 DMX address
5.2 – DMX MODE
2 Channels mode
Channel Value Function
1 000 – 255 Smoke quantity
2 000 – 255 Fan speed