Sagitter MICROBAR 54C, Руководство пользователя

Страница: 18 / 24

18
5. - SETUP
5.1 – MENU
DMX ADDRESS 001 - 512 DMX address
CHANNELS MODE 3CH / 5CH / 8CH / 13CH DMX channels mode
DIM CURVE CURV 1 - 4 Dimmer curve setting
DMX STATE DMX HOLD / BLACKOUT Status if DMX is lost
SLAVE MODE SLAVE Slave mode
AUTO MODE
SPEED 01 – 31
Manual settings of automatic modes
(memorized even if the projector is OFF)
AUTO 01 – 10
MANUAL MODE
RED
000 – 255
Manual settings of RGB colors
(memorized even if the projector is OFF)
GREEN
BLUE
STROBE 000 – 020
Built-in macro colors
(not memorized if the projector is OFF
COLOR 001 – 055
SETUP
DIMMER ALL 000 – 255 Max dimmer limit setting
BALANCE
RED (000 – 255)
White balance GREEN (000 – 255)
BLUE (000 – 255)
KEY LOCKS ON / OFF
Display lock
PWD: DOWN+UP+DOWN+UP
REMOTE ON / OFF Remote controller ON/OFF
DISPLAY 30s / ON Backlight display timing
RESET
REFRESH RATE
600HZ / 1200HZ / 2400HZ
/ 4800HZ
LEDs Refresh rate setting
MAX TEMP 30 – 70 °C
Max temperature setting. After this limit
the light of the LEDs is reduced.
INFO
SOFTWARE VER Software version
WORKING TIME Working time
RDM: UID ID RDM
5.2 – MASTER/SLAVE MODE
In this mode, more units can be linked together as a single chain and work in a synchronized
way.
•
Link together all the units from the connector DMX OUT to DMX IN.
•
Define the first unit of the chain as MASTER, all other units must be set in SLAVE mode.
•
Operate the Master unit in Automatic mode or Static mode to operate the entire system.
The entire chain of Slave unit will act as the Master unit