Sagitter ARROW300B, Руководство пользователя

Страница: 17 / 25

12.Maintenance and cleaning
It is absolutely essential that the fixture is kept clean and without dust. Dirt
and smoke - fluid residues must not be covered on or within the fixture.
Otherwise, the fixtures light output will be significantly reduced. Regular
cleaning will not onlyen sure the maximum light-output, but will also allow the
fixture to function reliably throughout its life.A soft lint-free cloth moistened.
With any good glass cleaning fluid is recommended, under no
alcohol or solvents be used!
DANG ER :Disconnect from the mains before starting any maintenance work.
The front objective lens will require weekly cleaning as smoke-fluid tends to
building up residues,reducing the light-output very quickly. The cooling -fans
should be cleaned monthly.
The gobos may be cleaned with a soft brush.the interior of the fixture should
be cleaned at least annually usinga vacuum-cleaner or an air-jet.
The dichroic colour-filters,the gobo-wheel and the internal lenses should be
cleaned monthly.
to ensure a proper function of the gobo-wheel,we recom mend lubrication in
six month intervals.The quantity of oil must not be excessive in order to avoid
that oil runs out when the gobo-wheel rotates.
There are no serviceable parts inside the device except for the lam pand the
fuss. Please refer to the instructionsunder Fitting/Exchanging the lamp .
Main tenance and service operations are only to be carried out by authorze
dealers.
Replacing the fuse
If the lamp bums out,the fuse might of fails might fuse, too. Only replace the
fuse by of same type and rating. Before replacing the fuse, unplug mains lead.
circumstance
of
17