SAGEMCOM UM20, Руководство пользователя

Страница: 23 / 33

1-Free Sagemcom - Modification with the authorization of the management concerned
– This docu-
ment and the information it contains is the property of Sagemcom
3000499643-R11-000-01 Page 23 UM User Manual (EN) rev. 3.2
Table 4: Summary of supported events
ID Event name Level Event description Parameters
FLA
G
10 FLAG_ACTIVITY INFO Activity detected or finished
in the optical flag [1 byte]
1: FLAG activity
detected
0: FLAG activity
finished
11 FLAG_ERROR_CRC WARN Incorrect CRC on the last
frame NA
R
A
D
IO
20 Radio attachement:
START INFO Join request sequence
started NA
21 Radio attachement:
SUCCESS INFO Join request accepted [4 bytes] device
address
22 Radio send DEBUG Radio frame sent [1 byte] FPort of
the rx frame
[1 byte] Size of
payload
[1 byte] Data
rate
23 Radio receive DEBUG Radio frame received [1 byte] FPort of
the rx frame
[1 byte] Size of
payload
[1 byte] Data
rate
25 Radio attachment:
FAILURE I NFO Supervision frame sent NA
C
MD
40 CMD_ACCESS_LVL INFO User with particular access
level started a session [1 byte] New ac-
cess level
[3 bytes] User
Identifier
ME
T
E
R
50 METER_STATE INFO Meter switched from state A
to state B [1 byte] State A
[1 byte] State B
51 METER_ALARM CRIT Meter alarms mask changed [1 word] Alarms
mask
52 DEVICE_REBOOT INFO Device rebooted NA
53 DISPLAY_STATE INFO Display enabled or disabled [1 byte]
1: Screen is en-
abled
0: Screen is dis-
abled
60 MONTHLY INFO Monthy event to keep track
of time NA
61 PARAM_RESET WARN Internal parameters reset NA