27
Basic Setup Wizard
SE681 WiMAX / engbt / SE681_FUG_EN_9 / Basic_configuration.fm / 18.5.11
Schablo
ne 201
1_04
_07
If the scan was not successful:
Both the integrated antenna and the outdoor antenna are directional antennas; this
means that they must at least be pointing roughly in the direction of a WiMAX network
base station in order to establish a radio connection. The access data must also have
been entered correctly.
If the scan was not successful:
First check your access data by going back to the WiMAX configuration page
(
If you have entered your access data correctly, adjust the antenna.
If you are using the integrated antenna:
Turn your SE681 WiMAX by approx. 45°.
Click
Ok
to restart the scan.
If the scan has still not been successful with the alignment changed:
Place the SE681 WiMAX by a window that faces a different direction.
If necessary, repeat the scan with all possible locations and alignments.
If necessary, ask your provider for the location of the nearest WiMAX network base
station and select a location for your SE681 WiMAX that points towards this base
station.
The best results will be obtained if the SE681 WiMAX is in sight of a WiMAX network
base station.
Correct:
Incorrect:
i
You must not move the SE681 WiMAX during the scan. You should
therefore always place the SE681 WiMAX upright and on a level surface
directly by the window.
