RTI95 T2 HD UK
44
Updating the software
The recorder automatically downloads ’over the air’ new software and services when they become
available.
You can also update your decoder using a USB key. Please check www.sagemcomdigital.co.uk to find
more information and the most recent software version for your product. A clear demonstration video
will show you how to easily update your recorder using the USB port.
If a problem is encountered during the download, the recorder displays on its front panel an error code.
For any other error messages, contact our customer services team on 08450 900 316.
A black screen (no video)
appears at the end of a
recording.
•
Some channels stop their broadcast with a fixed image or no
video. When a recording ends on such programmes, the video
recording stops but the time counter continues until the end of
the scheduled recording time. Make sure that you set your
manual recordings with the correct end time.
For any other problem.
•
Perform a default factory reset (see
Resetting the recorder
and formatting the hard disk drive
, page 41).
Error code
Meaning/Action
Er00
The software currently in the recorder is identical to the software
available.
Recorder updating is therefore not necessary.
Er02
•
The signal quality does not enable the software to be correctly
acquired. Press the
key to continue the process.
•
Check the signal strength and quality (see
Antenna Signal
Information
, page 41).
Er09
Er10
Er11
Symptom
Action
LU 253463441-A RTI95 T2 HD UK.book Page 44 Mercredi, 1. février 2012 10:59 10
