MF 9841 SG-ECK1 13 – 2
C. Installation of the scanner function expansion
PWB
1)
Remove four screws for fixing the scanner function expansion
PWB from the control PWB.
2)
Install the scanner function expansion PWB to the control
PWB by using the four screws for fixing the scanner function
expansion PWB.
Check that the connectors for connecting each PWB are prop-
erly connected.
D. Reattach the control PWB and the right rear
cabinet
• If the fax box unit is installed, carry out steps 1), 2), and 3)
additionally.
1)
Connect the interface cable to the control PWB unit.
2)
Push the interface cable into the recessed portion of the sheet
metal on the control PWB unit.
3)
Attach the snap band to the sheet metal of the control PWB
unit.
4)
Push the control PWB unit into the main unit.
5)
Secure the unit with the two screws.
6)
Fit the interface cable into the right rear cabinet cover.
7)
Attach the right rear cabinet cover to the main unit.
At this time, check that the four hooks are properly fitted to the
main unit.
8)
Secure the right rear cabinet with the screw.
9)
Attach the ozone filter cover to the main unit.
• Reconnect the cables that have been removed in step B to the
original positions of the control PWB unit.
Screws for fixing
the scanner
function expansion
PWB (4 pcs)
Connector
Control PWB
Scanner function expansion PWB
3
1
2
Hook 1 Hook 2
Hook 3
Hook 4
6
8
7
Содержание MF 9841
Страница 89: ......
