SAGEMCOM F@st Plug 502W, Руководство пользователя

Страница: 34 / 88

F@st Plug 502W PLC Wireless Router
- 32 -
The following table describes parameters in this page:
Field Description
Enable WAN Enable or disable the WAN connection of static IP type.
Connection Type Select Static IP from the drop-down list.
Service Type
INTERNET: It is mainly used for the Internet service, for
example, surfing the Internet.
TR069: It is mainly used for the TR069 service, for example,
TR069 remote management.
TR069_INTERNET: It is a mixed type, which applies to both
the Internet and TR069 services.
IP address
Enter the WAN IP address provided by the ISP. It cannot be
null.
Subnet mask
Enter the WAN subnet mask provided by the ISP. It varies
depending on the network type. Usually, the subnet mask is
255.255.255.0 (Class C).
Default Gateway IP
Enter the IP address of the gateway provided by the ISP.
This IP address is used for connecting to the ISP.
MTU
Set the maximum transmission unit. It is 1500 bytes for most
Ethernet networks. But some ISPs may require smaller
MTUs. Do not modify the value of MTU size unless it is
necessary for your ISP connection.
Domain Name Server
Assignment
You can manually enter the IP address of domain name
server or let the DNS server automatically assign one to your
router.
Domain Name Server
(Primary) IP Enter the IP address of the primary DNS server. Domain
names should be resolved first by the primary DNS server.
Domain Name Server
(Secondary ) IP
If the ISP provides another DNS server, enter the IP address
of the DNS server. If the primary DNS server fails to resolve
the domain name, the secondary will resolve it.
LAN Port
The PLC wireless router supports 2 LAN ports, which can be
bound to different interfaces.
WLAN Port
The PLC wireless router supports 1 WLAN ports, which can
be bound to different interfaces.
Enable VLAN Tagging
If you enable VLAN tagging and the VLAN value is not ‘0’,
message will carry the VLAN ID.