- 15 -
To do this, select a recording from the recording list, read it and press
at the desired location. Then press
the key
to display the banner and
for more information.
In CUT, select between:
• at begin: the part of the recording between the beginning and the
selected place will be erased
• in the middle: the part of the recording between the selected place
(index) and the next position will be erased. To select the other end
of the part to the erased, validate [in the middle], then move using
,
,
and
to the second marker. Then repeat the
operation
,
,
and validate [in the middle] again to cut
the selected zone.
• at end: the part of the recording between the selected place and the end will be erased.
• in two parts: the selected recording is cut into two parts that are called ‘1 recording name’ and ‘2
recording name’.
8-7 SAVING A RECORDING ON ANOTHER MACHINE
Connect your video recorder, for example, via the AUX Scart socket.
Select this input on your video recorder.
Select play mode on the receiver and record mode on the video recorder.
Then refer to your video recorder instruction manual for the procedure to follow.
LU 252 466 456A PVR6200T_6600T_7200T UK.book Page 15 Mercredi, 11. janvier 2006 4:14 16