3-6
Setting your machine
Date en cours : 24 mars 2003
\\Sct31nt3\doc 31nt3 mac\SAGEM FM\DOC EN COURS\MFL-MFC-MFK\MFL 251 259 240A_LU FAX LASER PRO 343SMS_345SMS Sagem
GB\Setting your machine.fm
+
You may enter the time you wish to transmit the document next to the current time and press
OK
.
+
If you wish to modify the document feed type, select one of the options
FEEDER
or
MEMORY
,
then press
OK
.
+
If you wish, you may enter the number of pages of your documents before transmitting.
+
Activate relay by pressing key
.
The document in the feeder will be relayed either immediately or at a later time (according to your
choice) to the remote fax which will relay the document.
)D[RU3&UHFHSWLRQGHSHQGLQJRQPRGHO
M 243 OK - SETUP / RECEPTION / PC RECEPT.
This menu, combined with a software program installed on your PC (supplied or on option depending
on model) will enable you to select the machine you wish to receive the documents on:
• fax.
• PC.
• PC if available, fax otherwise.
For more details, please refer to the instruction manual provided with the software kit.
7
(&+1,&$/
3$5$0(7(56
As delivered your fax is preset by default. However, you may adjust it to meet your requirements by
resetting the technical parameters.
To set the technical parameters:
M 29 OK - SETUP / TECHNICALS
+
Select the desired parameter and confirm with
OK
.
+
With the keys
5
or
6
, modify the parameter settings by following the table below and
press
OK
.
3DUDPHWHU
6HWWLQJ
6LJQLILFDWLRQ
1 - SCANNING
MODE
1 - NORMAL
2 - FINE
3 - SFINE
4 - PHOTO
Default value of the scan mode resolution for the documents
to be transmitted.
2 - TX HEADER
1 - WITH
2 - WITHOUT
If this parameter is on, your header will appear on all
documents sent to your subscribers with your name, number,
date and number of pages.
Warning: If you send a fax from the document loader, the
transmission header will not appear on the document your
correspondent receives.
MFL 251 259 240A_MF34 Sagem Gb.book Page 6 Lundi, 24. mars 2003 2:50 14
