Sagem D18V, Руководство пользователя

Страница: 156 / 170

D16V/D18V/D21V
- 15 -
2. Using the or key, select "
registration
". Press .
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_»
is replaced by a «*».
4. Press and hold key for 5 seconds (after 1 minute if no Handset has started association
process the base goes back to standby).
5. Press key to confirm. The display shall show "
WAITING
" to indicate the waiting state.
6. Once the handset is registered, you will hear a confirmation tone. The handset automatically
exits the registering mode.
7. The handset number assigned automatically by the base appears on the screen.
9.3.
Disassociation of a handset
This function allows you to de-register a handset from your base.
1. Press . Select "
advanced set
" using the or key, press .
2. Using the or key, select "
unregister
". Press .
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_»
is replaced by a «*». Press key to confirm.
4. Select the handset you want to delete (at standby state, "
pls reg h/s
" is displayed on the
screen).
You will hear a long beep confirmation tone.
9.4.
Modifying the country
1. Press . Select " advanced set " using the or key, press .
2. Using the or key, select "
country
". Press .
3. Enter the base master PIN code (default 0000). Each time a digit is entered the «_» is
replaced by a «*». Press key to confirm.
4. Using the or key, select the country where you will use the telephone. Press .
5. A confirmation screen appears, press .
The message "
wait
.." appears on the screen. You will hear a confirmation tone.
9.5.
Restoring the Handset / Base Default Settings
To restore the factory settings for your Handset or your Base:
1. Press . Select "
advanced set
" using the or key, press .
2. Using the or key, select "
reset
". Press .
3. A confirmation screen appears, press .
- If you want to confirm the reset, press .
- To cancel the reset, press .